6 inches minimum to ensure your unit is fully weatherproofed.
Our years of experience help us to understand the queries you may face. We have created a detailed FAQ section, which should cover your question but if you still need advice, contact us at sales@glazingvision.com
6 inches minimum to ensure your unit is fully weatherproofed.
Glazing Vision Inc specialize in hand crafted glass skylights only.
Glazing Vision are very proud that all of our skylights are designed and assembled in our UK factory in Diss, Norfolk.
Yes we do – Glazing Vision can supply solar control glass in various specifications to suit your requirements, please get in touch with our Technical Sales team who will be happy to advise.
Glazing Vision skylights have been designed to work with most known roof finishes such as felt, Sarnafil, standing seam, green roofs, tiled, decked areas. If you are unsure please contact our Technical Sales team for further assistance.
This depends on the type of unit proposed, Flushglaze units require a minimum 3″ and VisionVents 4″ but other products require wider up-stands, please visit Glazing Vision resource center for further details or contact our Technical Sales team who will be happy to assist.
Yes, please visit our resource center where we hold full details of our standard range in PDF, and DXF format.
Glazing Vision specialize in the design and manufacture of glass skylights only.
To maintain quality standards Glazing Vision assemble the entire unit, the glass is structurally bonded into the frame in our factory and the skylight is supplied complete so we are unable to supply glass only.
Your skylight will always need a perimeter frame but for fixed skylight we can manufacture units up to approximately 90 ft² without the requirement for any additional supporting framework. Other unit types vary so please contact our Technical Sales team to discuss your requirements.
Yes, we do provide safety laminated glass and fire rated glass. Other options are available as necessary to your specifications.
Typically lead time for standard products is eight weeks, for sliding or box skylights its twelve weeks. Skylights which require custom design can take longer and we usually provide details of this when providing a quote.
We offer RAL7015 Slate Grey as standard and where dual colored RAL9010 Pure White internals, other colors are available on request from the RAL color chart but do cost a little more as they have to be powder coated separately.
Yes, Glazing Vision provide dedicated delivery.
We require the measurement taken from the face of the external weathered curb, in the case of wall abutments measure from the wall to opposing external weathered curb.
Glazing Vision do not supply the curb as this commonly forms part of the building fabric itself and there are many variances to take into account. We do have comprehensive drawings which detail our requirements – please visit our resource section where you can download in either PDF or DXF format.
‘Self-Cleaning’ glass is only suitable for pitches of 15 degrees or over, we provide an alternative called Ritec Clearshield which is similar in many respects and can be applied in our factory.
By providing this information, it allows us to forward your inquiry on to your local Technical Specification Manager and enables them to provide you with a formal quotation quicker.